Benutzer:ZanderMclain7
Aus Salespoint
K (Die Seite wurde neu angelegt: „Learning how to construct your own LAPTOP OR COMPUTER from scratch can be a very difficult task if you know nothing about pcs. However once you learn how to do it...“) |
K (Die Seite wurde neu angelegt: „Learning how to construct your own LAPTOP OR COMPUTER from scratch can be a very difficult task if you know nothing about pcs. However once you learn how to do it...“) |
Aktuelle Version vom 05:10, 17. Mai 2012
Learning how to construct your own LAPTOP OR COMPUTER from scratch can be a very difficult task if you know nothing about pcs. However once you learn how to do it along with understand exactly what direction to go, it actually gets quite enjoyable having the ability to easily strip down and develop old or fresh PC's. I would like to take this possiblity to lay out the fundamental components of some type of computer and help you learn to build a laptop or computer from scratch.
PC Components
The most common pc components that you simply must have are the mouse, keyboard, hard drive, floppy drive, ram chips, sound and graphics card, power supply, motherboard and keep an eye on. I'm assuming that you will know what all these components look similar to. If you are usually unsure about a few components just hunt for pictures of them on the web and you will dsicover what they are generally.
Connection Process
Firstly you have to do business with the mother board as well as the mother board growing plate. Firstly, gently screw the particular motherboard onto the mother board plate with the notches or screws which were provided with the particular package or kit. Once this is done you will need to insert the PROCESSOR (Central Processing Unit) into its slot on the motherboard. Sometimes these CPU sockets have levers which you'll want to gently release for you to open it up so take note of that. Gently slide the particular CPU into its socket ensuring the pins about the backside slide in correctly otherwise it could possibly get damaged. You can today clip the lever back to place and be sure it is protected.
Now you will have to attach the heatsink for the CPU chip. You might realize that the CPU already incorporates the heatsink/fan attached to it then you definitely can read more. Now you should connect the small cable from the particular heatsink fan to the corresponding socket for the motherboard to give it power.
The next step would be to place the ram chips into their respective slots that are long and skinny. Once this have been done you may well mount the motherboard increasing plate onto the side of the pc and screw/slip it in in order that it is attached effectively.
The power supply may be the next component to manage. The power supply area is normally located at the back of the pc case and it is indicated with screw holes which can be unoccupied. Just try and also maneuver it around to fit with the corresponding holes before you decide to screw it in. The power supply includes a main system connection which gets plugged into the power slot about the motherboard, a floppy energy connector which gets connected to the floppy drive in addition to a few standard peripheral strength connectors (crimson, yellow and african american wires) which get attached to your hard devices and cd roms. You will ought to mount the hard drives, cd roms as well as floppy drives and connect them with those connectors making sure that the red wire on each strength connector is pointed inwards towards motherboard. I'll explain why below.
Right, now we move onto both ports on your motherboard called the primary and secondary IDE Ports. You will notice them because they are rectangular together with brackets around them. these ports are utilized to connect the computer drives and cd roms. The cables that get plugged into these two locations are 40 pin IDE cables with have 3 contacts on each cable television. Make sure the longest the main cable is attached to the IDE ports. You need for connecting the primary IDE cable in the motherboard to the actual hard drive(s) and the secondary IDE port is utilized to connect the DVD Roms for a motherboard. When you put these IDE cables in the cdroms and hard drives ensure that the red cable strip is hand and hand with the red wire strip with the power connectors that are connected to those devices. Consult your manual if you have one to find out how to use the different jumpers to switch between master as well as salve drives on each port. This will let you choose which hard disks are primary as well as secondary.
Now that the energy supply is linked to the motherboard and also the various other components you simply must plug graphics and sound card inside their slots. Once this is done make sure you connect the top panel connectors for the corresponding LED lights so your lights will appear when the personal computer boots. Failure to do so can lead to non function from the system.
Lastly make confident everything is related properly. This includes the external mouse, keyboard, monitor cable and also power cables so your computer will first turn on and function properly. If all is performed well then it should be okay.here
